Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

How can I reset an ASA 5505 ?

It seems that I managed to set a field that determines what IP is authorized to administer the ASA, and I set it to 192.168.10.12. Well, that subnet got an error and doesn't yet exist, and 192.168.1.1 is no longer authorized.

While I was in there I tried to set Vlan3 to be 192.168.1.1 and authorize it in case things went afoul, but Vlan3 got an error and failed too.

So I tried pressing and holding the reset button. It doesn't work. The book says it is for future use, and using the CLI I can see that my outside IP is still in place, meaning the reset button did not reset the device.

I can still get in with CLI on COM1, but don't know the commands. If someonce could point me to a CLI command reference I might get it. Or maybe the command to allow https access on 192.168.1.1 again.

Thank you in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: How can I reset an ASA 5505 ?

Type help or '?' for a list of available commands.

ASA> en

Password: *******

ASA# config t

ASA(config)# http 192.168.1.0 255.255.255.0 inside

ASA(config)# exit

ASA# wr mem

try it again...

2 REPLIES
Green

Re: How can I reset an ASA 5505 ?

Type help or '?' for a list of available commands.

ASA> en

Password: *******

ASA# config t

ASA(config)# http 192.168.1.0 255.255.255.0 inside

ASA(config)# exit

ASA# wr mem

try it again...

Re: How can I reset an ASA 5505 ?

I'm back in. Thank you !

507
Views
0
Helpful
2
Replies