Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How does load balancing work if you have 2 routers?

Just working some theory through my head and I'm at a brick wall. Here's the sceneario:

1 segment with 2 routers. Each of the routers have a 10mbs WAN circuit to the same destination terminating on 2 routers.

wan thing.jpg

Say there's a HSRP interface between the 2 routers in the same LAN segments.

How would load sharing across the two WAN links work?

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

How does load balancing work if you have 2 routers?

Silver

How does load balancing work if you have 2 routers?

for load sharing, implemet GLBP (gateway load balancing protocol) in lieu of HSRP. there are similarities in commands. for detailed infor google GLBP.

---

Posted by WebUser Neeraj Jagga from Cisco Support Community App

5 REPLIES
New Member

How does load balancing work if you have 2 routers?

Silver

How does load balancing work if you have 2 routers?

for load sharing, implemet GLBP (gateway load balancing protocol) in lieu of HSRP. there are similarities in commands. for detailed infor google GLBP.

---

Posted by WebUser Neeraj Jagga from Cisco Support Community App

New Member

How does load balancing work if you have 2 routers?

Thanks guys, I forgot about GLBP. I guess back before GLBP we used to have 2 default gateways on each segment 1 for each HSRP address and have the users split between them.

Super Bronze

How does load balancing work if you have 2 routers?

Disclaimer

The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

rshum wrote:

Thanks guys, I forgot about GLBP. I guess back before GLBP we used to have 2 default gateways on each segment 1 for each HSRP address and have the users split between them.

Yes, especially mHSRP, but you could also, with some routing protocols, start with one router and use the other path.  This might perform better than GLBP as GLBP ties to MACs and routing round robins on flows.

Another possible alternative might be OER/PfR.  OER/PfR also performs dynamic load balancing.

Silver

How does load balancing work if you have 2 routers?

Hi, we featured your question on Page. Check out some of the responses here: http://www.facebook.com/CiscoSupportCommunity/posts/382613405105023

---

Posted by WebUser Cisco NetPro from Cisco Support Community App

3300
Views
0
Helpful
5
Replies
CreatePlease login to create content