Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to copy flash

Hi ,

I am trying to copy image from flash from rtr1 to rtr2.. the files is c3745-ipvoice-mz.123-11.T.bin.. and I do not know how to do that. I tried what I know but did not work.. I also wants to delete the old image on rtr2 b4 I can upload the new image to rtr2 since I do not have enoug room to have both images in one rtr.. Thanks for your help

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: how to copy flash

Hello,

you need to make rtr1 a tftp-server for the file image you want to transfer:

rtr1:

tftp-server flash:imagefile-name

rtr2:

delete flash:oldimage:filename

squeeze flash:

copy tftp flash:

it will ask the ip address

then the filename

then where you want to save it

Hope to help

Giuseppe

3 REPLIES
Hall of Fame Super Silver

Re: how to copy flash

Hello,

you need to make rtr1 a tftp-server for the file image you want to transfer:

rtr1:

tftp-server flash:imagefile-name

rtr2:

delete flash:oldimage:filename

squeeze flash:

copy tftp flash:

it will ask the ip address

then the filename

then where you want to save it

Hope to help

Giuseppe

New Member

Re: how to copy flash

Thanks Buddy !!!! done , it was easy :-). just an fyi .. I added

boot-start-marker

boot system flash c3745-ipvoice-mz.123-11.T.bin

boot-end-marker

to have a rtr2 reboot after reload

Thanks

Hall of Fame Super Silver

Re: how to copy flash

Hello,

yes it is needed well done, I focused on moving the file from rtr1 to rtr2

thanks for your kind remarks and having signaled that this case has an happy end

Best Regards

Giuseppe

228
Views
5
Helpful
3
Replies