11-25-2006 11:00 PM - edited 03-05-2019 01:01 PM
Hi all
If an Ip address conflict occurs ,Is there any way (command) to find out from the Switch , that the conflicted Ip address (PC) are connected to which port on that Switch .
Thanks
Sudeesh
Solved! Go to Solution.
11-25-2006 11:20 PM
Hi Sudeesh,
There is no direct command which can let you the port number on a switch but definetely there is way. If you know the conflicting ip address then you can go to the first layer 3 device or first layer 3 hop for that network and do "sh ip arp
HTH
Ankur
*Pls rate all helpfull post
11-25-2006 11:20 PM
Hi Sudeesh,
There is no direct command which can let you the port number on a switch but definetely there is way. If you know the conflicting ip address then you can go to the first layer 3 device or first layer 3 hop for that network and do "sh ip arp
HTH
Ankur
*Pls rate all helpfull post
11-25-2006 11:34 PM
Hi Ankur
Thanks for your information
Sudeesh S
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide