We're running a 3745 router on the edge and a 6506 on the core. We have 2 connections going from the switch to the router, and are not utilizing any dymamic routing. Is there a way for us to priotitize the traffic between the 2 devices for a specific connection?
Are both links sending/receiving traffic to/from the 6500?
If so, how are you forcing the route to go via both paths? (static routing) ?
You can potentially implement Policy Base Routing (PBR) in the 6500 to match traffic based on a set criteria and set the next hop to be one of the links. You will need to do the same in the 3745 for return traffic.
Are you talking about configuring priority queue on both links for egress traffic from the 6500?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.