Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IE3000 - Dual DC Power Supply

Hello,

Can we connect two DC power supplies on this equipment ? If so, do we need any specific cable or connector ?

3 REPLIES

Re: IE3000 - Dual DC Power Supply

The switch can operate with a single power source or with dual power sources. When both power sources are operational, the switch draws power from the DC source with the higher voltage. If one of the two power sources fail, the other continues to power the switch.

Check the following link for info how to wire the power cable.

http://www.cisco.com/en/US/docs/switches/lan/cisco_ie3000/hardware/installation/guide/HIGINSTL.html#wp1219946

New Member

Re: IE3000 - Dual DC Power Supply

Thanks for this reply,

Can we also install two AC/DC converter ? And again if so how can we connect the second one ? Is there another specific DC power clip ?

Re: IE3000 - Dual DC Power Supply

I believe that you can use two AC/DC converter. But you have to connect them manually since there is no such DC power clip for the 2nd AC/DC converter.

197
Views
0
Helpful
3
Replies