Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

input and output rate on fastethernet in cisco router and switches

hi ,

traffic coming inside to interface is inbound and traffic leaving the interface is outbound .

similarly in CAT5 cable which pair is used for input rate and which pair is used for output rate , when we force speed 100 Mbps and duplex full

kindly brief me thank you .

1 REPLY
Hall of Fame Super Silver

Re: input and output rate on fastethernet in cisco router and sw

Hello Saintoskumar,

for pinout = cable details see

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00801f5d9e.shtml#rj45

to be noted that two types of Rj-45 ports exist one type "NIC" and one "switch" they can be connected with a straight cable because the "switch" port receives on the wires where "NIC" port sends and viceversa.

Hope to help

Giuseppe

215
Views
4
Helpful
1
Replies
CreatePlease to create content