Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Iomem memory message

Hi!

I bought a refurbished router (3640- 64MB/16MB flash) for my home lab in ebay. During booting process I got this message regarding memory as follows:

"If any of the above Memory Requirements are UNKNOWN, you may be using an unsupported configuration or there is a software problem and system operation may be compromised. Rounded IOMEM up to: 4MB. Using 6 persent iomem. [4MB/64MB]."

Is there any problem with the memory? I want to make it sure before to call the vendor.

Thank you for your reply.

Best regards

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Iomem memory message

Sanny

I do not see anything in what you posted that indicates that there is any problem. The first part of the message

"If any of the above Memory Requirements are UNKNOWN..." is a standard message that always prints out during the boot process for this platform. And then it indicates that it will be using 4 MB out of 64 MB for IO memory. This is quite normal during the boot process.

HTH

Rick

2 REPLIES
Hall of Fame Super Silver

Re: Iomem memory message

Sanny

I do not see anything in what you posted that indicates that there is any problem. The first part of the message

"If any of the above Memory Requirements are UNKNOWN..." is a standard message that always prints out during the boot process for this platform. And then it indicates that it will be using 4 MB out of 64 MB for IO memory. This is quite normal during the boot process.

HTH

Rick

Hall of Fame Super Silver

Re: Iomem memory message

Sanny

Thank you for using the rating system to indicate that your question was resolved (and thanks for the rating). It makes the forum more useful when people can read a question and can know that they will read a response which resolved the question. I encourage you to continue your participation in the forum.

HTH

Rick

516
Views
0
Helpful
2
Replies
CreatePlease login to create content