Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

IOS Upgrade problem

Hi, I'm trying to upgrade my 803 router that is currently running 12.1 IOS. I would like to upgrade to 12.2-46. I have downloaded the image and transfered it to the device. I have entered the boot system flash:<filename> command, saved the config and reloaded. The router will only Load the 12.1 image (both images are in flash). Is there a step I'm missing? The router has TinyROM 1.0(2), could that need to be upgraded? I downloaded TinyROM 1.14(1), how would I install that? Do i acutally need console access or can I do it remotely? This is kind of urgent, so any help would be greatly appreciated. Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: IOS Upgrade problem

hi

you need to access your router via console port to upgrade the tiny rom.

pls find the link for more info on how to upgrade the same.

http://www.cisco.com/en/US/docs/routers/access/800/805/software/configuration/guide/rommon.html

regds

1 REPLY

Re: IOS Upgrade problem

hi

you need to access your router via console port to upgrade the tiny rom.

pls find the link for more info on how to upgrade the same.

http://www.cisco.com/en/US/docs/routers/access/800/805/software/configuration/guide/rommon.html

regds

141
Views
0
Helpful
1
Replies