Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

IOS Versions and Specs

Hi everyone,

I am preparing for my CCNA, while I am working GNS3 or the real routers or switches some commands are not applied. I did some researches online and found it is the IOS versions that I am using. so can any one give me a brief description for the IOS versions and specs, and which lab routers and switches have full version in general. something else which routers and switches are best to build up a home lab to practice hands-on lab at home

TNX

Everyone's tags (1)
2 REPLIES

IOS Versions and Specs

Hi everyone,

I  am preparing for my CCNA, while I am working GNS3 or the real routers  or switches some commands are not applied. I did some researches online  and found it is the IOS versions that I am using. so can any one give me  a brief description for the IOS versions and specs, and which lab  routers and switches have full version in general. something else which  routers and switches are best to build up a home lab to practice  hands-on lab at home

TNX

Hello,

GNS3 simulator is good for practice and traoubleshooting the real time senario, try to use ios for 3800,3700 or 2600 series switch with NME module for switching practice but with limited functionlity.

Hope it Helps

Regards

Ganeshh Iyer

Rate if it Helps ...

IOS Versions and Specs

Hi There,

do not use all the routers in GNS3. use only the 3725 platform with a 12.4T IOS line. It will be more than enough for all CCNA and CCNP scenarios

HTH

Alessio

478
Views
10
Helpful
2
Replies
CreatePlease to create content