Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IP addresses may not be configured on L2 links.

Hello to all, 877 have just brought a shindy but I have problems to form the fastethernet, on having tried to form an ip address it(he,she) appears:

IP addresses may not be configured on L2 links.

Since I can solve it? I have tried to use the SDM but it(he,she) does not assign me ip for DHCP. Thank you very much

3 REPLIES

Re: IP addresses may not be configured on L2 links.

Hi,

Only the Ethernet WAN interface can have an IP directly assigned. The LAN interfaces need to be assigned to a VLAN, which has the IP address.

Have a look at the following and post again if you still have trouble.

http://www.cisco.com/en/US/docs/routers/access/800/850/software/configuration/guide/dhcpvlan.html#wp999406

and this link has a complete sample config:

http://www.cisco.com/en/US/docs/routers/access/800/850/software/configuration/guide/sampconf.html

HTH

Andrew.

New Member

Re: IP addresses may not be configured on L2 links.

Hello Andrew, I continue with the same mistake, not because it(he,she) does not warn me: (

New Member

Re: IP addresses may not be configured on L2 links.

use the interface vlan 1 command:

interface vlan 1

ip address x.x.x.x y.y.y.y

no shut

!

that shut do it!

12507
Views
8
Helpful
3
Replies
CreatePlease to create content