LAN designing issue

[blue4cisco]

WE have 3 network(office lan,internet,private network(seprate from office lan)) & 3 user catagory. as 1.user with internet+office lan

2.user with private network+office lan

3users with internet+office lan+private netowrk.now how i designe such complex network where all requirement meet. i am unable to spend too much on hardware devices.

[abhishek_nandavat]

Hi!

It would help if you let us know the hardware you are having with you right now,if any.

Well what you can do is make 3 VLANS for all the 3 networks and then with the help of access lists you can permit or deny the access to respective users to the respective network. Also you WILL need atleast one Layer 3 device to perform inter-Vlan routing.

For more information on how to configure VLANs and access lists, please refer the following links:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca801.html

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca7c0.html

Hope it helps.

Please remember to rate the post.