I've missed what I surmise to be a basic yet critical step in configuring a small 891 isr. So basic that I've put off asking since Friday:
Here's the overview which might be enough to skip the long version:
I can ping and resolve WAN-side things from the router, but not from a PC connected to it. My guess is that I'm just talking to the management interface and nothing else from the PC, but don't know what to tell it to do next
(slightly) longer description
VLAN1 is the default 10.10.10.1, pc is 10.10.10.2 connected to fe7
WAN is on fastethernet8 and connected to a gateway. WAN interface addr is 192.168.10.100, gateway is 192.168.10.1
default route is 192.168.10.1
Giving 192.168.10.100 to my nic and plugging straight in to the gateway works as expected.
Going back to the Cisco switch from the PC, I can ping 10.10.10.1 and 22.214.171.124, but nothing further
I'm happy to provide more details, but I'm so new to cisco that I'm flying a bit blind.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.