Re: Layer 3 Device for SMB (Small and Medium Business)
It depends on how L3 intensive it should be - an 1841 Router should do for something like basic internet traffic and a little WAN stuff
if you want a little more the nI would start with a 2801.
AS far as switrches are concerned it also depends in internal infrastructure ( lots of users can use 1 stack of switches (3750) or users are in groups of up to 48 (2960/3560) depending on you also needing L3 capability or not and on the 3750 a Stackable Switch system....
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...