Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Limite traffic trunk per vlan

In the interface to Internet we have a trunk with 802.1q with 2 VLAN. It is a Gigabit interface of a Catalyst 6509, only we can configure the level 2.

We need to limit the traffic output for one of the vlan, so as not to flood the link shared with the other vlan.

In other words, we need limit all traffic from only one VLAN of the trunk (without distinguishing type of traffic). How we could do?

3 REPLIES
Community Member

Re: Limite traffic trunk per vlan

Community Member

Re: Limite traffic trunk per vlan

The Catalyst 6500 does not support. Thank you, ¿other idea?

CAR is supported on these routers:

•Cisco 2600 series

•Cisco 3600 series

•Cisco 4500 series

•Cisco 4700 series

•Cisco 7200 series

VIP-Distributed CAR is a version of CAR that runs on the Versatile Interface Processor (VIP). It is supported on the following routers with a VIP2-40 or greater interface processor:

•Cisco 7000 series with RSP7000

•Cisco 7500 series

Hall of Fame Super Silver

Re: Limite traffic trunk per vlan

Hello Susana,

you can use a policer with modular QoS

see

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/qos.html

Hope to help

Giuseppe

229
Views
0
Helpful
3
Replies
CreatePlease to create content