Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

mail server

Hi all

Can anyone tell me how I would configure my firewall in my dmz, would it have 2 network cards one on the lan and external that plugs into the dmz, or would it just have one plugged in to the dmz and we route to this via my default gateway ?

thanks

3 REPLIES

Re: mail server

Hi

You need to have 3 interfaces to have DMZ configured in your LAN.Atleast you need to have VLANs configured in your PIX to have that.

PIX 501 doesnt support VLAN config but PIX 506E does support 2 vlans.

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080172786.html#wp1113437

regds

New Member

Re: mail server

whats is the normal setup for a mail server ? can anyone show mw how they have done it ? and what ports are permitted etc

Re: mail server

Hi

Its the smtp port being opened for the mail access in PIX firewall..

you can refer this link for more on the setup, schematic topology with a sample config has been discussed here ..

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800941c8.shtml

regds

239
Views
0
Helpful
3
Replies
CreatePlease to create content