Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

nat and routing

hi

two routers connected with serial interfaces and the first nat 192.168.12.0 into 10.2.150.0 and forword packets to the second one. Is there any reason to be present any entry for the network 192.168.12.0 at the static routes on the second router ?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: nat and routing

No. The second router need not know how to route to 192.168.12.0 at all as that would defeat the purpose of NAT. However, the second router needs to know how to route to the NATted network 10.2.150.0.

HTH

Sundar

1 REPLY

Re: nat and routing

No. The second router need not know how to route to 192.168.12.0 at all as that would defeat the purpose of NAT. However, the second router needs to know how to route to the NATted network 10.2.150.0.

HTH

Sundar

126
Views
0
Helpful
1
Replies
CreatePlease to create content