Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Need to get wireless access to my ethernet LAN - WRVS4400N

I've got a LAN with a pfsense Firewall / DHCP server. I used to use a WRT54G for wireless access to the network but it recently fried. I purchased a WRVS4400n to replace it but I'm having trouble configuring it to work like my old WRT54G. Here's what I need:

T1 -> Firewall / DHCP -> SR2024 Switch -> WRVS4400N as a wireless bridge.

Try as I might, even selecting the DCHP passthrough, it doesn't work. My LAN is 192.168.1.x and my DHCP server is also the DNS server. I cannot get the WRVS4400N to work correctly on this network. I want to be able to use all of my LAN resources from the wireless connection, but it won't. Can someone please help?

2 REPLIES

Re: Need to get wireless access to my ethernet LAN - WRVS4400N

You need to setup the DHCP relay on the device - read the docs that came with the device.

HTH>

Community Member

Re: Need to get wireless access to my ethernet LAN - WRVS4400N

Thanks, but it doesn't work. The device gets an IP just fine but it does not do any DHCP relaying. Even when I manually set my laptop to a LAN IP and connect it to a wired port it is unable to get to the internet. The documentation doesn't mention much about setting up a DHCP relay. Any additional help would be much appreciated.

244
Views
0
Helpful
2
Replies
CreatePlease to create content