Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Newbe Voip Question

I am creating a 3750 switch config. I want to have two Vlans, one for data and one for voice. How do I seperate these and how does the switch know

to use Vlan X for voice and Vlan Y for data ?

Cheers

Colin

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Newbe Voip Question

Hi,

create your VLANS then on ports where you have PC+ IP phones attached  you can do this:

switchport mode access

switchport access vlan

switchport voice vlan

then the DATA VLAN will be untagged = native VLAN and the Voice VLAN will get tagged with its corresponding VLAN id.

Regards.

Alain.

Don't forget to rate helpful posts.
2 REPLIES
Purple

Newbe Voip Question

Hi,

create your VLANS then on ports where you have PC+ IP phones attached  you can do this:

switchport mode access

switchport access vlan

switchport voice vlan

then the DATA VLAN will be untagged = native VLAN and the Voice VLAN will get tagged with its corresponding VLAN id.

Regards.

Alain.

Don't forget to rate helpful posts.
New Member

Newbe Voip Question

Perfect Thanks Alain

563
Views
5
Helpful
2
Replies
CreatePlease login to create content