Based on your description I can only assume that the management IP for your switch is configured on the default vlan 1.
If you want to be able to access the switch from both vlan 1 and vlan 10 you will need to configure a router with access to both vlans. Alternately if you want to access the switch on vlan 10 only you will need to change the management vlan on the switch.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...