Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

No logging console

Hi,

Can I get the meaning for the cmd

No logging console

No loggin Monitor

Awaiting reply

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: No logging console

The first message turns off logging to the console connection. If you are connected to the device via a console connection, all messages are sent to the screen. This can also be seem as a security risk (leaving it on) as having a console connection opened and having this command enabled can potentially spike up the CPU and cause a DoS.

The second command disables logging messages to the terminal lines with monitor on. For instance, you telnet to the device and want to view messages not available to vty, you type the command terminal monitor. This allows you to see messages that you otherwise will be missing under a normal telnet session. Messages sent to the monitor session have the same security level as the ones sent to the console, so many engineers assumed they are switching to a console connection which they aren't.

HTH,

__

Edison.

3 REPLIES

Re: No logging console

it will stop logging messages popping up while you are in middle of configuring. it can be annoying to keep on being interupted with messages while typing...shame it cant be done with colleagues :-)

Hall of Fame Super Bronze

Re: No logging console

The first message turns off logging to the console connection. If you are connected to the device via a console connection, all messages are sent to the screen. This can also be seem as a security risk (leaving it on) as having a console connection opened and having this command enabled can potentially spike up the CPU and cause a DoS.

The second command disables logging messages to the terminal lines with monitor on. For instance, you telnet to the device and want to view messages not available to vty, you type the command terminal monitor. This allows you to see messages that you otherwise will be missing under a normal telnet session. Messages sent to the monitor session have the same security level as the ones sent to the console, so many engineers assumed they are switching to a console connection which they aren't.

HTH,

__

Edison.

New Member

Re: No logging console

Thanks Edison,

For a clear understanding/explanation.

24573
Views
3
Helpful
3
Replies