Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

No web access since using VLAN (SGE2000)

Hello,

Using one SGE2000 switch.

I'm unable to access the switch web interface since I assigned a PVID to the port where my computer is connected.

If I use the PVID 1 and untagging the VLAN 1, it works fine.

What can I do to access the web interface with another VLAN ?

Everyone's tags (3)
2 REPLIES
New Member

No web access since using VLAN (SGE2000)

1. add vlan, for example with id 2.

2. add ip address in vlan 2.

3. port which connected to your computer must be vlan 2 native mode acces, all trafic trought out from this port will untaged.

use command

switchport mode access

or

encapsulation dot1q 2 native

New Member

No web access since using VLAN (SGE2000)

I missed the "Management VLAN" option in the "IPv4 Interface" page. Now it's fine !

Thanks.

926
Views
0
Helpful
2
Replies
CreatePlease to create content