I managed to do the password recovering BIN thing and just reset the passwords without losing the config. Given, all IP schemes and ACL's need to be changed, but it helps with insight, especially since your helpful post.
So I have a question on this:
access-list if_outside permit icmp any any
access-list if_outside permit tcp any host 184.108.40.206 eq smtp
access-list if_inside permit ip 192.168.4.0 255.255.255.0 any
access-group if_outside in interface outside
access-group if_inside in interface inside
I'm assuming this allows ICMP incoming from the outside interface to the inside.
And then allows traffic from any host outside with SNMP traffic to 220.127.116.11... ?
The clearification I need is with applying the access lists. Could someone clearify those last two lines?
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...