FAQ document for Cisco Catalyst 3650 Series Switches indicates for all POE PID's on this model full poe is attainable either by 2 power 640VAC supplies or one large 1025 VAC.
Q. Can the PoE budget of Cisco Catalyst 3650 switch be increased by replacing its power supply with a high-capacity power supply?
A. Yes, the available PoE budget of a Cisco Catalyst 3650 PoE switch can be increased by either replacing its power supply with a higher capacity one or adding a second PoE power supply model (640W or 1025W).
We have WS-C3650-48PS with 1 640W power supply, Vendor indicates this model can not achieve full Poe with second power supply 15.4 across 48 ports? They are insisting on returning this model WS-C3650-48PS and replace with WS-C3650-48FS with 1 1025W?
I am very confused as they said the internals of the switch models are different ? Does any one have a WS-C3650-48PS with 2 640 PS or 1 1025 and can show "sh power inline" ?
In most all my experience most switches add to the POE budget with second power supply just how the Cisco FAQ explains this.
According to Cisco FAQ " Cisco Catalyst 3650 Series Switches" page 4 Table 4 it states all POE PID's cabable of Full POE.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.