Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

port channel shutdown or individual ports

Hello,

We have a wireless controller connected to a core switch via two port bundled together to form a port channel 2.

There is a plan to shut down the switch ports connected to controller for some testing.

Is it advisable to shut the individual ports(eg.gig1/6 & gi1/7) from the switch side or to do a shutdown on the interface Po2.

Appreciate all inputs.

2 REPLIES
VIP Purple

port channel shutdown or individual ports

Always better to shutdown the physical ports & once you done with WLC testing you can enable switchport again.

HTH

Rasika

**** Pls rate all useful responses ****

New Member

I think you should shut down

I think you should shut down the port-channel first, because when you shut it down, its member ports will go "admin down" too.

273
Views
0
Helpful
2
Replies
CreatePlease login to create content