04-15-2008 06:20 AM - edited 03-05-2019 10:24 PM
I am implementing QoS for the first time on a router interface and need to ensure that traffic to and from a certain IP address has gauranteed bandwidth. I have created the class-map and am matching to an Access-Group. I created a policy-map and applid the class-map to the policy map. I have also specified the bandwidth for the policy-map. My question... when I appply the policy-map via the service-policy command to an interface, how do I apply it so it matches traffic in both directions?
So far I have...
service-policy output MYPOLICYMAP
I dont think I can also apply...
service-policy input MYPOLICYMAP
How do I get it to gaurantee bandwidth no matter which direction the packets are going?
Thanks in advance.
Solved! Go to Solution.
04-15-2008 07:21 AM
Phil,
You are very welcomed, as a rule; all QoS tools are done outbound except Classification and Marking and Policing which can be done also inbound.
BR,
Mohammed Mahmoud.
04-15-2008 07:06 AM
Hi,
All the queuing techniques can only be applied outbound, to guarantee BW on both directions you need to apply the QoS on both routers on the outbound direction.
BR,
Mohammed Mahmoud.
04-15-2008 07:18 AM
Great. Thanks for the reply. After I posted the question I thought that might be the solution. Thank you for confirming it for me.
04-15-2008 07:21 AM
Phil,
You are very welcomed, as a rule; all QoS tools are done outbound except Classification and Marking and Policing which can be done also inbound.
BR,
Mohammed Mahmoud.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide