04-10-2009 06:49 PM - edited 03-06-2019 05:07 AM
Hi
I'm in desprete need to learn how to configure an MDS 9000 switch, if you can provide a doc that I can read, or some simple instructions after you log in, I would appreciate it very much.
I don't see any docs that can help me?
Please respond to my E-mail if possible.
Jorge
04-11-2009 03:19 AM
Hello Jorge,
use the following
http://cisco.com/en/US/docs/storage/san_switches/mds9000/sw/san-os/quick/guide/quick_cg.html
Hope to help
Giuseppe
04-11-2009 01:10 PM
Thanks Giuseppe, is very much appreciated. The only problem I have is that in order to use the CLI commands you need to be more familiar and know what you are doing.
I would be more confortable using the the GUI interface.
Is there a doc that shows or gives this info that you can share, please?
I know the Brocade switch very well, by using the GUI interface and not the telnet interface, (this is where you use the CLI commands).
Jorge
04-12-2009 09:24 AM
Hello Jorge,
the following link may help it is about Fabric Manager
http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/fm/quick/guide/fm.html
Hope to help
Giuseppe
04-12-2009 01:21 PM
Thanks again, hope this will help, by using the Fabric Manager.
Jorge
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: