Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Quick Configuration Instructions on MDS 9000

Hi

I'm in desprete need to learn how to configure an MDS 9000 switch, if you can provide a doc that I can read, or some simple instructions after you log in, I would appreciate it very much.

I don't see any docs that can help me?

Please respond to my E-mail if possible.

jorge11b@yahoo.com

Jorge

4 REPLIES
Hall of Fame Super Silver

Re: Quick Configuration Instructions on MDS 9000

New Member

Re: Quick Configuration Instructions on MDS 9000

Thanks Giuseppe, is very much appreciated. The only problem I have is that in order to use the CLI commands you need to be more familiar and know what you are doing.

I would be more confortable using the the GUI interface.

Is there a doc that shows or gives this info that you can share, please?

I know the Brocade switch very well, by using the GUI interface and not the telnet interface, (this is where you use the CLI commands).

Jorge

Hall of Fame Super Silver

Re: Quick Configuration Instructions on MDS 9000

Hello Jorge,

the following link may help it is about Fabric Manager

http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/fm/quick/guide/fm.html

Hope to help

Giuseppe

New Member

Re: Quick Configuration Instructions on MDS 9000

Thanks again, hope this will help, by using the Fabric Manager.

Jorge

285
Views
0
Helpful
4
Replies
CreatePlease to create content