Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

"ip.notgateway" ?

Hi,

I'm currently trying to configure an Cisco 871 router to do NAT(overload), but I'm bumping in to errors.

debug ip error tells me:

*Mar 20 05:30:57.515: IP: s=10.106.1.10 (Vlan1), d=212.181.x.x, len 84, dispose ip.notgateway

This should probably be a very trivial thing to do, but I can't figure out what I do wrong. The router is running: c870-ipservicesk9-mz.124-4.T.bin

/regards

  • Getting Started with LANs
2 REPLIES
New Member

Re: "ip.notgateway" ?

I don't know what caused this, maybe the "no ip routing" but when switching this "on" I got other NAT problems and therefore I decided to upgrade the IOS version before digging any futher in this.

I installed the new IOS 12.4(9) and the NAT problem where gone.

Silver

Re: "ip.notgateway" ?

Hi,

Firstly check that you can reach the destination IP address from the local router without NAT. It seems for me the routing part is missing on your router and without this router can't forward traffic to ISP - at leats for test set a default route and we will see.

That's my suggestion.

Bye,

FCS

441
Views
0
Helpful
2
Replies