06-19-2006 06:35 AM - edited 03-05-2019 11:57 AM
Hi,
I'm currently trying to configure an Cisco 871 router to do NAT(overload), but I'm bumping in to errors.
debug ip error tells me:
*Mar 20 05:30:57.515: IP: s=10.106.1.10 (Vlan1), d=212.181.x.x, len 84, dispose ip.notgateway
This should probably be a very trivial thing to do, but I can't figure out what I do wrong. The router is running: c870-ipservicesk9-mz.124-4.T.bin
/regards
06-20-2006 08:42 AM
I don't know what caused this, maybe the "no ip routing" but when switching this "on" I got other NAT problems and therefore I decided to upgrade the IOS version before digging any futher in this.
I installed the new IOS 12.4(9) and the NAT problem where gone.
06-21-2006 12:56 AM
Hi,
Firstly check that you can reach the destination IP address from the local router without NAT. It seems for me the routing part is missing on your router and without this router can't forward traffic to ISP - at leats for test set a default route and we will see.
That's my suggestion.
Bye,
FCS
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: