Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Remote console access via AUX port

Hi,

Please could someone give me a config for connecting a console port to an AUX port of a router.

I have a Pix FW console port connected to the AUX port of a Cisco router with a rollover cable with RJ45 connectors on each end.

I don't think any config is required on the FW, however I don't know what commands are required on the router.

Thanks,

Peter

2 REPLIES
New Member

Re: Remote console access via AUX port

Additionally, I am able to telnet to the Aux port 'telnet 10.10.10.1 2001', it responds 'Password OK'...

Thanks,

Peter

New Member

Re: Remote console access via AUX port

line aux 0

no exec

stopbit 1 <-- may not be needed, but I always put it in

login

I think that's it...but it's been a while and I don't have a reference in front of me.

1550
Views
0
Helpful
2
Replies