01-11-2012 11:06 AM - edited 03-07-2019 04:17 AM
When I issue debug commands on a sw I am telnet'd into, I am seeing nothing on the screen (as far as debug statements)...any ideaers?
Thanks!
Solved! Go to Solution.
01-11-2012 12:35 PM
There is a very useful command for that:
terminal monitor
Here is a link to the command reference:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf003.html
regards,
Leo
01-11-2012 12:35 PM
There is a very useful command for that:
terminal monitor
Here is a link to the command reference:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf003.html
regards,
Leo
01-11-2012 10:49 PM
Worked, thanks for the link.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: