Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Remote office Connection

Hi,

I am looking for best configuration scenario to connect between two offices using WIMAX technology as the media of communication.

to add more complexity, I would have fiber connection between two offices acting as redundancy for WIMAX Link.

What steps are required to do load balancing / failover scenario.

3 REPLIES
Community Member

Re: Remote office Connection

Just a suggestion. If the sites are far apart from each other I would recommend using the Fiber Optic connection as your main connection. Fiber optic is the best media for long distances.

Hall of Fame Super Gold

Re: Remote office Connection

I agree. Use the fibre optic as your primary path. WiMAX for site-to-site is not feasible when you have fibre optic at hand. With fibre optic you can push 1Gb or 10Gb.

Community Member

Re: Remote office Connection

Hello,

Site_A===Router_A=======Connected_via_Fiber====Router_B====Site_B

site_A has network 192.168.1.0/24

Site_B has network 10.10.10.1/24

Do I need to have a different IP subnet for Fiber connection link router.

what is the best practise in this example

165
Views
0
Helpful
3
Replies
CreatePlease to create content