Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Reseting Router 877-k9

Hi there.

i have tried to reset my router 877 to default, and using reset button.

normally default should be 10.10.10.1/255.0.0.0, but i cant get into it.

Any help?

NUNO

6 REPLIES

Re: Reseting Router 877-k9

have you tried doing a "write erase" and then "reload" ? That will definitely clear the config! If you are having issues getting into enabled mode, issue a break upon power-on (and seeing the DRAM in the router). change the config-register to 0x2142, and that will fire up the router with a blank config. Not sure exactly what you are trying to accomplish here, but maybe I guessed it.

-brad

www.ccbootcamp.com

(please rate the post if this helps!)

New Member

Re: Reseting Router 877-k9

hi!

i accessed to console, but it havent those commands. do you know where can i found a bin file to upload, or other option?

Thanks,

NUNO

New Member

Re: Reseting Router 877-k9

Testing lower main memory - data equals address

Testing lower main memory - checkerboard

Testing lower main memory - inverse checkerboard

Clearing lower 16K memory for cache initialization

Clearing bss

Initializing Flash

Reading monitor variables from NVRAM

Finish Reading monitor variables from NVRAM.

Enabling interrupts

Enabling instruction cache

Reading cookie

Initializing main memory

Sizing NVRAM

Exiting init

C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory

No bootable image file: flash:/

Unable to open boot file

This is want it get to me... can't open bootable image.

Help???

Thanks

NUNO

Re: Reseting Router 877-k9

Your original post doesnt quite reflect the issue you are having. Sounds like you erased your FLASH as part of your "set the router to a default config" process! :)

You need to download an IOS image from TAC as your next step.

http://www.cisco.com/public/sw-center/index.shtml

-brad

http://www.ccbootcamp.com

(please rate the post if this helps!)

New Member

Re: Reseting Router 877-k9

do you know where can i get IOS for Cisco 877?

Thanks it helped =)

NUNO

Re: Reseting Router 877-k9

you're welcome, please rate my posts! :)

you'll have to get the IOS from cisco using a CCO account. that's the only legal way to get IOS.

-brad

www.ccbootcamp.com

(please rate the post if this helps!)

343
Views
0
Helpful
6
Replies