Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

resetting switch

If I need to reset my switch do I just do a erase startup-config and delete flash:vlan.dat ?

thanks

2 REPLIES
New Member

Re: resetting switch

Yes, the erase startup-config will delete the stored configuration file and the delete flash:vlan.dat erases the vlan database. After issuing these commands you have to reboot the switch without saving the current configuration and the switch should reboot with a blank configuration.

New Member

Re: resetting switch

you can also do hard resetting which will erase all ur config.

1.Hold ur button in setup button

2. Remove the plug /switch off & on again

3. hold the button till it comes back (LED glow)

now it will load with factory config

120
Views
3
Helpful
2
Replies