I STARTED A NEW JOB LAST WEEK AND THE ROUTER WE HAVE IS A CISCO 2801 AND SEEMS TO BE THAT THAT I DID NOT CHANGED ALL THE PASSWORDS FOR THIS DEVICE AND I THINK THE LAST NETWORK ADMINISTRATOR REMOTELY CONNECTED TO THE ROUTER BEING THAT I AM THE ONLY PERSON ALLOWED TO ENTER SERVER ROOM AND NOW I AM NOT ABLE TO ACCESS THE ROUTER,AND OUR WEBSITE IS DOWN INCLUDING LAN AND THE ONLY THING I COULD DO IS PING ONE OF THE ADRESSES AND TELNET ROUTER AND PASSWORD HAS BEEN CHANGED I'VE TRIED TO LOGIN USING SDM CONNECTING TO SWITCH PORT,CONNECTING TO 0-0 AND 0-1 WITH A CROSSOVER RJ-45 AND ALSO TRIED THE CONSOLE IS THERE ANYWAY I COULD HARD RESET THIS ROUTER., PLEASE IF SOMEONE HAS AN ANSWER I WILL APRECIATED BECAUSE I WANT TO GET OUT OF THIS SITUATION ASAP
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...