08-26-2007 02:59 PM - edited 03-05-2019 06:06 PM
my reverse telnet shows open but I am not connected to the sw1
2511sw#telnet 192.168.10.10 2001
Trying 192.168.10.10, 2001 ... Open
when I do show line one .....I get this
***************************************************************
2511sw#clear line 1
[confirm]
[OK]
2511sw#show line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
* 0 CTY - - - - - 8 0 0/0
1 TTY 9600/9600 - - - - - 4 0 0/0
2 TTY 9600/9600 - - - - - 2 0 0/0
3 TTY 9600/9600 - - - - - 1 0 0/0
4 TTY 9600/9600 - - - - - 1 0 0/0
5 TTY 9600/9600 - - - - - 0 0 0/0
6 TTY 9600/9600 - - - - - 0 0 0/0
7 TTY 9600/9600 - - - - - 0 0 0/0
8 TTY 9600/9600 - - - - - 0 0 0/0
9 TTY 9600/9600 - - - - - 0 24 0/0
10 TTY 9600/9600 - - - - - 0 38 0/0
11 TTY 9600/9600 - - - - - 0 138 0/0
12 TTY 9600/9600 - - - - - 0 129 0/0
13 TTY 9600/9600 - - - - - 0 0 0/0
14 TTY 9600/9600 - - - - - 0 0 0/0
15 TTY 9600/9600 - - - - - 0 0 0/0
16 TTY 9600/9600 - - - - - 0 0 0/0
17 AUX 9600/9600 - - - - - 0 0 0/0
18 VTY - - - - - 0 0 0/0
19 VTY - - - - - 0 0 0/0
20 VTY - - - - - 0 0 0/0
21 VTY - - - - - 0 0 0/0
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
22 VTY - - - - - 0 0 0/0
2511sw#telnet 192.168.10.10 2001
Trying 192.168.10.10, 2001 ... Open
08-30-2007 11:07 AM
Hi Karim,
Its obvious a problem in the cables or in the Async module or the termserv, can you attach a file containing the final configuration, show version, show diag and show lines, and can you please try to reload the termserv.
HTH,
Mohammed Mahmoud.
09-09-2007 12:03 PM
sorry for the delay, I was wokring on My ccna , I should commit to take it soon . but as far as the connection I think is the async module . I used the other one and it works , I have to chng the config for the loopback but most important is that I did sometroubleshooting . lol// nice jobs guys and thanks for the help .
09-09-2007 02:45 PM
Hi Karim,
I am glade to know that you've finally solved your problem, it really sounded to be a hardware issue as everything else looked OK, anyway good luck with your exam :)
BR,
Mohammed Mahmoud.
08-30-2007 10:44 AM
What is the config of console on target device?
A silly question - did you try pressing enter many times and wait for some time after the Trying .....Open line?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide