i dont know if it's the correct forum but i got a simple question that i would like to be answered.
Recently i brought a 877 adsl router with the advance security ios. I thought this ios supported 802.1q, but i don't think so. So i upgraded to advance ip services ios. This ios support 802.1q and vlan implementation. The router seems to work fine. Everything was configured through CLI.
My question: This upgrade can cause some kind of problem with router functionality? if so, which ones?
The configuration is very simple: no vpns and basic firewall configuration.
You shouldn't run into any problems since you "upgraded" feature sets. I am assuming that you upgraded with the same or later IOS version as well. I don't think you will have any issues in regards to upgrading the IOS.
They recommend 28Mb so that you can have your IOS and SDM installed in flash on the router. If you have no desire to have SDM installed on the router or want to run SDM from your PC then you are fine. It will not cause a problem on your router at all.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.