When the routers comes up and if it has the devices connected to its interfaces and they are not in shutdown state it will detect that the interfaces are up and up and are directly connected to each other.
Router will definetely be able to ping its directly connected interfaces and even devices connected to its interfaces will be able to ping each other as they are directly connected.
If you do "sh ip route" in your router you will see all directly connected devices.
The Basic functionality of the router is to to route the packet or to show the packet right path to reach the destination. So everypacket which comesinto the router check the routing table and as per that it travels and reachg the destination.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...