Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

sfp type

Hi,

If we are using multi mode fiber across connections, should we use GLC-SX-MMD?

Please correct me if this is not right.

thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: sfp type

If the fibre running across is single mode, should we be using GLC-LH-SMD on the switch sides?

You should be using GLC-LH-SMD at BOTH SIDES.

3 REPLIES
New Member

sfp type

If the fibre running across is single mode, should we be using GLC-LH-SMD on the switch sides?

Hall of Fame Super Gold

Re: sfp type

If the fibre running across is single mode, should we be using GLC-LH-SMD on the switch sides?

You should be using GLC-LH-SMD at BOTH SIDES.

575
Views
5
Helpful
3
Replies