Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Static entry on ASA

Hello's,

I have a ASA running 7.2.

I'm trying to issue this command:

static (inside,outside) tcp 4.1.14.10 3389 192.168.0.5 3389 netmask 255.255.255.255 0 0

And keep getting this:

ERROR: Static PAT using the interface requires the use of the 'interface' keyword instead of the interface IP address

This is my first time messing with an ASA and I'm just trying to forward any traffic on port 3389 (RDP) to 192.168.0.5.

Help?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: Static entry on ASA

If 4.1.14.10 is the IP address assigned to the ASA outside interface change your static statement to

static (inside,outside) tcp interface 3389 192.168.0.5 3389 netmask 255.255.255.255

Jon

2 REPLIES
Hall of Fame Super Blue

Re: Static entry on ASA

If 4.1.14.10 is the IP address assigned to the ASA outside interface change your static statement to

static (inside,outside) tcp interface 3389 192.168.0.5 3389 netmask 255.255.255.255

Jon

New Member

Re: Static entry on ASA

Gah!

Reading the error message, I tried "outside" instead of the word "interface". Syntax error.

Anyhow, did what you said + added ACL entry and everything working great.

Thanks so much for the fast response!

2438
Views
0
Helpful
2
Replies