Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

trouble in configuring cisco router 887

Hello,

a newbie here. i am having trouble in configuring my cisco router 887. my connection type from my ISP is static ip. im not sure if i have entered the correct command in the CLI.

router(config)# interface fa 0/0

router(config-if)# ip address 61.10.XX.XX  x.x.x.x

what would be the command to do this?

and also, i want my other PCs to receive DHCP ip address from the router.

please help me to confirm the correct commands.

thank you.

regards,

Sugar

2 REPLIES
Silver

trouble in configuring cisco router 887

here is the thing......the fa 0/0 is faceing the ISP yeah?

issue a no shut down on the fa 0/0 because by defualt its off

the for the private address to access the internet you will need to enable NAT for the addresses in the inside of your network ...here is a sample of basic dhcp this is done for the interface facing your lan

conf t

service dhcp

ip dhcp pool 192.168.1.0/24

network 192.168.1.0 255.255.255.0

default-router 192.168.1.1

dns-server 192.168.1.5 192.168.1.6

exit

ip dhcp excluded-address 192.168.1.1 192.168.1.199

ip dhcp excluded-address 192.168.1.241 192.168.1.255

---

Posted by WebUser Dickson Zulu from Cisco Support Community App

trouble in configuring cisco router 887

To add, make sure your fa0/0 isnt shutdown.

516
Views
0
Helpful
2
Replies
CreatePlease to create content