01-26-2006 03:25 PM - edited 03-05-2019 11:46 AM
hi all,
when changing catalyst switch configuration from Hyper terminal of my PC, I can not use the up arrow key to recall the last command. when I hit the "up arrow key" , some strange characters appears on the command line and executes those without hitting enter!
up arrow key works fine on other computers' hyper terminal.
you all know how useful that key when u r working on CLI.
what can I do to make it work properly?
tx in advance for helping.
01-26-2006 03:47 PM
Hi,
Do the following:
- open up File -> Properties in HyperTerminal
- click on the Settings tab
- change Emulation to VT100
That should do it.
Hope that helps - pls rate the post if it does.
Regards,
Paresh
01-26-2006 03:51 PM
thank you Paresh
01-26-2006 03:54 PM
Did that work ?
Thanks.
Paresh
01-26-2006 10:48 PM
Hello,
have a look at installing the ´latest´ version of Hyperterminal as well, you can download it at the link below. Latest is relative, since it dates from 2003...:)
HyperTerminal Private Edition version 6.3
http://www.hilgraeve.com/htpe/index.html
Regards,
GP
01-27-2006 08:56 AM
Paresh unfortunately it didnt work.
I will follow GPs advice.
greetings
01-27-2006 11:35 AM
Hello,
while you are at it, you might want to try TeraTerm as well, you can download it here:
http://www.ayera.com/teraterm/download.htm
Regards,
GP
01-27-2006 08:38 PM
Hi,
Is your PC running Win2000 ?
If so, you may be afflicted with this problem:
http://support.microsoft.com/default.aspx?scid=KB;en-us;q263077
Regards,
Paresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide