When you downloaded the file, did you use ftp? If you used ftp, did you remember to set it to "BIN" mode (default is ASCII for many clients).
For many TFTP servers, once you define the directory holding the files (in the TFTP server's config file), it becomes the root directory for the client.
It may be that you really want to use the "archive" command (from priviledged mode, on the target switch), which will pull the files from the tarball via TFTP and put them where they belong on your switch.
So, what did you do / try already? Save us some guessing time ...
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...