Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using 3750 PoE on outdoor ethernet

I have to install Cisco Aironet 1400 AP's outdoors and have a need to run Cisco IP phones in a remote building that has no place for the switch so we want to feed the phone using outdoor copper from the 3750 PoE switch. I can't see a SELV certification for the 3750 and the install notes show that this is required for the PoE power injector and for the phones too. What are the rules for using a 3750 PoE on outdoor ethernet cable? Is it allowed?

1 REPLY
Bronze

Re: Using 3750 PoE on outdoor ethernet

I think if Cisco Catalyst 3750 Series is powering a PD, and if the PD then gets connected to Electrical wall outlet, the switch will continue to report that the PD is powered inline. If a PD is being wall powered first (a wall plug is connected before an Ethernet cable), then if wall power is disconnected, the PD will reset and discovery begins.

135
Views
0
Helpful
1
Replies