Can someone please explain to me how you go about using the VMPS. I read it's a server, a database, and it seems maybe something else as well. Where is it stored (switch, server, etc?) and how do you go about accessing it. Thanks,
Further to earlier replies, whilst its true that dot1x has largely replaced VMPS due to its enhanced security profile, VMPS works very well for closed networks and the client is still included in IOS switches. You may or may not have a CatOS platform to act as a server but the OSS vmps daemon runs fine under Linux and Windows. For example, I use it in a dual-boot classroom environment where the workstations are placed in different VLANs depending on their boot profile; the MACs in one of the profiles are spoofed, of course (using e.g. SMAC), and referenced in the config file.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...