I have a simple LAN with a few client PCs running standard windows VPN client software that need to connect to an external VPN server through a 2811 router which is on my LAN. In order for VPN pass through to work through this 2811 router, does it need the advanced security IOS or will it work fine with just the basic IOS?
Speaking to Cisco I was a little confused about this because they were saying that I would need the advanced security IOS. I am guessing that is probably the case if the router itself is the VPN endpoint which is not so in my case.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...