Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WAN and Internet bandwidth

Morning,

Am a little confused here. Can the same bandwidth utilized for WAN be also utilized for internet access. A vendor submitted a proposal and is quoting differently for both. I know they are two different services but the client wants both WAN and Internet services. I figured at locations where internet access wants to be denied its a  matter of an acl or a policy stmt on the rtr.

Kindly clarify.

Regards,

DJ.

2 REPLIES
New Member

WAN and Internet bandwidth

Depends on what you're buying.

Some providers can sell you "MPLS" with local internet hopoff, which means that the "WAN" can be used for both internet and site to site connectivity. (You send all of your traffic to the ISP router, they determine if it is internet or site to site and they send it to the internet for you if neccesary; it's all handled by them in their "cloud")

You can also get MPLS only, which is strictly site to site access. You can then get a separate internet connection, either at the HQ only, and route all sites out using it, or get an internet feed at each site and use PBR or something to send internet traffic out locally and site to site across your MPLS.

There's a million ways to do it. It depends on what you're being quoted. To answer the question you'd need to show us the quote and/or call the vendor to get them to explain exactly what you're buying from them...

Hope this helps!

Andy

New Member

WAN and Internet bandwidth

Let's say you have 100 sites and a HQ where datacenter is:

You get two lines 1 for internet and 1 for MPLS  which will interconnect all sites together through ISPs MPLS cloud.

If sites wanted to go to the internet they would come through WAN (mpls or whatever), ideally hit your proxy/firewall and hit the internet through your internet line, meaning you would need to connect WAN router and INTERNET router together.

Also you can have internet at each site and have some kind of PBR as Andrew mentioned which would say .. if the destination is for www.google.com go thru interface fa0/1 if the destination is for your datacenter server somewhere go through serial 0/0 or whatever you have, but supporting that as sites addup would be a problem.

Get some DSL/CABLE at each site and run some backup connection to HQ like Eigrp through DMPVN and so on.

hope to help.

519
Views
6
Helpful
2
Replies
CreatePlease to create content