Re: WS-X6548-GE-TX and WS-X6748-GE-TX compatibility
Just to follow up on previous post.
You can use a 6548-GE-TX with both the Sup720 or the Sup2. The 6548-GE-TX is fabric enabled. With a Sup2 you need a separate Switch Fabric Module, otherwise the 6548 just connects to the shared 32Gbps bus. A Sup720 has a switch fabric module built in so the 6548 would connect to the switch fabric.
The 6748-GE-TX can, as the previous poster said, be used only with the Sup720.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...