Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1130AG Won't Hold Time And Date After A Reload

Hello - I am currently deploying 1130AG standalone access points to all my locations. I am having trouble getting them to consistantly authenticate against AD using RADIUS and PEAP. I have noticed that all the access points revert back to a date in 2001 or 2002 after every reboot. So, first, after I issue the clock set command and fix the time and save it, how do I get it to hold that after a reboot. And second, could the time/date mismatch be causing a problem with authentication? Here is a typical config that I am using:

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

hostname S064AP

!

enable secret XX

!

aaa new-model

!

!

aaa group server radius rad_eap

server 10.0.64.10 auth-port 1645 acct-port 1646

!

aaa group server radius rad_mac

!

aaa group server radius rad_acct

!

aaa group server radius rad_admin

!

aaa group server tacacs+ tac_admin

!

aaa group server radius rad_pmip

!

aaa group server radius dummy

!

aaa authentication login eap_methods group rad_eap

aaa authentication login mac_methods local

aaa authorization exec default local

aaa accounting network acct_methods start-stop group rad_acct

!

aaa session-id common

ip name-server 10.0.64.10

!

!

!

dot11 ssid S064WLAN

authentication open eap eap_methods

authentication network-eap eap_methods

authentication key-management wpa

guest-mode

infrastructure-ssid optional

!

power inline negotiation prestandard source

!

!

username admin password XX

username Cisco privilege 15 password XX

!

bridge irb

!

!

interface Dot11Radio0

no ip address

no ip route-cache

!

encryption mode ciphers tkip

!

ssid S064WLAN

!

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

!

interface Dot11Radio1

no ip address

no ip route-cache

shutdown

dfs band 3 block

channel dfs

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

!

interface FastEthernet0

no ip address

no ip route-cache

duplex auto

speed auto

bridge-group 1

no bridge-group 1 source-learning

bridge-group 1 spanning-disabled

!

interface BVI1

ip address 10.0.64.205 255.255.255.0

no ip route-cache

!

ip default-gateway 10.0.64.1

ip http server

no ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

ip radius source-interface BVI1

snmp-server community XX RW

radius-server host 10.0.64.10 auth-port 1645 acct-port 1646 key XX

bridge 1 route ip

!

!

!

line con 0

line vty 0 4

!

end

2 REPLIES
Gold

Re: 1130AG Won't Hold Time And Date After A Reload

Looks like you are running into bug CSCsq64212.

Hall of Fame Super Gold

Re: 1130AG Won't Hold Time And Date After A Reload

You can enable SNTP to synchronize your clock.

Command: sntp server

168
Views
0
Helpful
2
Replies